Sridha’s Article : Man – Made Earthquakes Update

The number of earthquakes has increased dramatically over the past few years within the central and eastern United States. Nearly 450 earthquakes magnitude 3.0 and larger occurred in the four years from 2010-2013, over 100 per year on average, compared with an average rate of 20 earthquakes per year observed from 1970-2000.

This increase in earthquakes prompts two important questions: Are they natural, or man-made? And what should be done in the future as we address the causes and consequences of these events to reduce associated risks? USGS scientists have been analyzing the changes in the rate of earthquakes as well as the likely causes, and they have some answers.

USGS scientists have found that at some locations the increase in seismicity coincides with the injection of wastewater in deep disposal wells. Much of this wastewater is a byproduct of oil and gas production and is routinely disposed of by injection into wells specifically designed for this purpose.

Review Article on Injection-Induced Earthquakes

U.S. Geological Survey geophysicist William Ellsworth reviewed the issue of injection-induced earthquakes in a July 2013 study published in the journal Science. The article focused on the injection of fluids into deep wells as a common practice for disposal of wastewater, and discusses recent events and key scientific challenges for assessing this hazard and moving forward to reduce associated risks.

What is Induced Seismicity?

Although it may seem like science fiction, man-made earthquakes have been a reality for decades. It has long been understood that earthquakes can be induced by impoundment of water in reservoirs, surface and underground mining, withdrawal of fluids and gas from the subsurface, and injection of fluids into underground formations.
Water that is salty or polluted by chemicals needs to be disposed of in a manner that prevents it from contaminating freshwater sources. Often, it is most economical to geologically sequester such wastewater by injecting it underground, deep below any aquifers that provide drinking water.

What is Wastewater Disposal?

Wastewater can result from a variety of processes, including those related to energy production. For example, water is usually present in rock formations containing oil and gas and therefore will be co-produced during oil and gas production. Wastewater can also occur as flow back from hydraulic fracturing operations that involve injecting water under high pressure into a rock formation to stimulate the movement of oil and gas to a well for production.

Wastewater injection increases the underground pore pressure, which may, in effect, lubricate nearby faults thereby weakening them. If the pore pressure increases enough, the weakened fault will slip, releasing stored tectonic stress in the form of an earthquake. Even faults that have not moved in millions of years can be made to slip and cause an earthquake if conditions underground are appropriate.

Although the disposal process has the potential to trigger earthquakes, not every wastewater disposal well produces earthquakes. In fact, very few of the more than 30,000 wells designed for this purpose appear to cause earthquakes.

Hydraulic Fracturing

Many questions have been raised about whether hydraulic fracturing — commonly known as “fracking”— is responsible for the recent increase of earthquakes. USGS’s studies suggest that the actual hydraulic fracturing process is only very rarely the direct cause of felt earthquakes. While hydraulic fracturing works by making thousands of extremely small “microearthquakes,” they are, with just a few exceptions, too small to be felt; none have been large enough to cause structural damage. As noted previously, underground disposal of wastewater co-produced with oil and gas, enabled by hydraulic fracturing operations, has been linked to induced earthquakes.

Unknowns and Questions Moving Forward

One risk-management approach highlighted in Ellsworth’s article involves the setting of seismic activity thresholds for safe operation. Under this “traffic-light” system, if seismic activity exceeds preset thresholds, reductions in injection would be made. If seismicity continues or escalates, operations could be suspended.USGS scientists are dedicated to gaining a better understanding of the geological conditions and industrial practices associated with induced earthquakes, and to determining how seismic risk can be managed.

The current regulatory framework for wastewater disposal wells was designed to protect drinking water sources from contamination and does not address earthquake safety. Ellsworth noted that one consequence is that both the quantity and timeliness of information on injection volumes and pressures reported to the regulatory agencies is far from ideal for managing earthquake risk from injection activities.

Thus, improvements in the collection and reporting of injection data to regulatory agencies would provide much-needed information on conditions potentially associated with induced seismicity. In particular, said Ellsworth, daily reporting of injection volumes, and peak and average injection pressures would be a step in the right direction, as would measurement of the pre-injection water pressure and tectonic stress.

Importance of Understanding Hazards and Risks

There is a growing interest in understanding the risks associated with injection-induced earthquakes, especially in the areas of the country where, before the modern boom in oil and gas production, earthquakes large enough to be felt were rare.

For example, wastewater disposal appears to be related to the magnitude-5.6 earthquake that struck rural central Oklahoma in 2011 leading to a few injuries and damage to more than a dozen homes. Damage from an earthquake of this magnitude would be much worse if it were to happen in a more densely populated area.

The USGS and Oklahoma Geological Survey (OGS) have conducted research quantifying the changes in earthquake rate in the Oklahoma City region, assessing and evaluating possible links between these earthquakes and wastewater disposal related to oil and gas production activities in the region. In a joint statement {http://www.usgs.gov/newsroom/article.asp?ID=3710}, USGS and OGS identified wastewater injection as a contributing factor for the 2011 earthquake swarm and damaging magnitude 5.6 event.

Studies show one to three magnitude 3.0 earthquakes or larger occurred yearly from 1975 to 2008, while the average grew to around 40 earthquakes per year from 2009 to mid-2013.

“We’ve statistically analyzed the recent earthquake rate changes and found that they do not seem to be due to typical, random fluctuations in natural seismicity rates,” said Bill Leith, USGS seismologist. “These analyses require significant changes in both the background rate of events and earthquake triggering properties needed to have occurred to be consistent with the observed increases in seismicity. This is in contrast to what is typically found when modeling natural earthquake swarms.”

The Oklahoma analysis suggests that a contributing factor to the increase in earthquakes occurrence may be from injection-induced seismicity from activities such as wastewater disposal. The OGS has examined the behavior of the seismicity through the state assessing the optimal fault orientations and stresses within the region of increased seismicity, particularly the unusual behavior of the swarm just east of Oklahoma City.

Advertisements
Sridha’s Article : Man – Made Earthquakes Update

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s